Drummotors
Drummotors
Advantages:
- Hardened and grinded gears to keep noise level low and increase lifetime significantly.
- Bolted endflanges. Easy to dismantle in case it might be necessary.
- Module of the gears are always at least one size bigger then usually to make them more suitable for even the hardest application.
- Robust cast iron end flanges, gear housing, stator housing and motor flanges.
- Completely manufactured and assembled in our own factory.
- Short delivery times in case of emergency (large stock of standard components).
Drummotor type | TM 100B25 | TM 113B25 | TM 127.25 | TM 138.25 | TM 160.25 | TM 160.30 | TM 215.30 | TM 215.40 | TM 215B50 |
| Drum diameter (mm) | 100 | 113 | 127 | 138 | 160 | 160 | 215 | 215 | 215 |
| Shaft diameter (mm) | 25 | 25 | 25 | 25 | 25 | 30 | 30 | 40 | 50 |
Power (kW) | 0.05-0.37 | 0.04-0.55 | 0.10-1.1 | 0.10-1.1 | 0.10-0.75 | 0.10-2.2 | 0.10-2.2 | 0.37-5.5 | 1.5-4.0 |
Speed (m/s) | 0.007-3.60 | 0.008-4.40 | 0.008-2.60 | 0.009-2.80 | 0.13-3.30 | 0.06-4.00 | 0.08-5.30 | 0.12-4.70 | 0.18-0.31 |
Drummotor type | TM 273.40 | TM 315.40 | TM 315.50 | TM 400A50 | TM 400.60 | TM 500A60 | TM 500A75 | TM 620A75 | |
| Drum diameter (mm) | 273 | 315 | 315 | 400 | 400 | 500 | 500 | 620 | |
| Shaft diameter (mm) | 40 | 40 | 50 | 50 | 60 | 60 | 75 | 75 | |
Power (kW) | 0.37-5.5 | 0.37-5.5 | 1.1-11 | 1.1-11 | 1.5-22 | 1.5-22 | 11-30 | 11-30 | |
Speed (m/s) | 0.17-5.00 | 0.18-5.20 | 0.16-4.40 | 0.20-4.80 | 0.20-4.60 | 0.25-4.70 | 0.80-3.20 | 1.00-3.90 |
Descriptions by type: http://www.vandergraafpte.nl/products_en.html?pmCatId=3
